Double Kettlebell Bent-Knee Windshield Wipers

  • MuscleAbs/Core
  • EquipmentKettlebell
  • LevelAdvanced

Muscles worked

Double Kettlebell Bent-Knee Windshield Wipers
ChestObliquesAbsBicepsTricepsNeckFront deltsAdductorsQuadsCalvesForearms
Front
TrapsRear deltsUpper backTricepsLower backForearmsGlutesHip abductorsHamstringsCalvesCalvesCalves
Back
PrimarySecondary
Exercise guide

How to do the Double Kettlebell Bent-Knee Windshield Wipers

The Double Kettlebell Bent-Knee Windshield Wipers exercise is an advanced core-strengthening movement that combines controlled side-to-side knee rotation with two kettlebells held independently above the chest. The exercise is performed while lying on the back with the hips and knees bent approximately 90 degrees. The athlete slowly lowers both bent knees toward one side, returns them to the center, and repeats the movement toward the opposite side while maintaining stable overhead kettlebell positions. The primary muscles involved are the abdominal muscles and obliques, while the hip flexors, shoulders, upper back, and forearms contribute to movement control and stabilization.

The variation described here involves holding one kettlebell in each hand with both arms extended above the chest. The kettlebells remain approximately stationary throughout the exercise. This differs from variations in which a single kettlebell is held with both hands, the weights are anchored on the floor, or the kettlebells move independently of the legs.

Unlike traditional abdominal exercises that primarily involve repeated spinal flexion, the Double Kettlebell Bent-Knee Windshield Wipers challenge the trunk through controlled rotational movement and resistance to unwanted spinal motion. The athlete must coordinate pelvic rotation while maintaining stability through the upper body and controlling the weight of the bent legs.

The exercise is commonly used in advanced core training, functional strength programs, athletic conditioning, and kettlebell workouts. It requires abdominal strength, rotational control, shoulder stability, and coordination. Although the knees remain bent to reduce the rotational lever length, holding two kettlebells above the chest introduces a substantial upper-body stabilization challenge.

To perform the Double Kettlebell Bent-Knee Windshield Wipers, begin by lying on your back on an exercise mat. Hold one lightweight kettlebell securely in each hand and extend both arms toward the ceiling. Position each kettlebell approximately above its corresponding shoulder rather than directly above your face, and maintain comfortable wrist alignment.

Keep your head, neck, and shoulders supported by the mat. Brace your abdominal muscles and align your rib cage with your pelvis. Lift both legs into a tabletop position with your hips and knees bent approximately 90 degrees. Your thighs should point upward while your shins remain approximately parallel to the floor.

Once you establish the starting position, slowly begin lowering both bent knees toward your right side. Allow your pelvis to rotate naturally while keeping your upper back and shoulders supported by the mat. Maintain abdominal tension and avoid allowing either kettlebell to move toward the descending knees.

Continue lowering only as far as you can maintain control of your lower back and pelvis. Some athletes may lower their knees close to the floor, while others may use a smaller range of motion. The objective is not to touch the floor but to maintain controlled movement without excessive lumbar rotation or extension.

Pause briefly at the end of the movement while maintaining abdominal tension. Engage your obliques and supporting abdominal muscles to return your knees toward the center. Move slowly and avoid using momentum to swing your legs upward.

Once your knees return to the tabletop position, repeat the movement toward your left side. Maintain both kettlebells in stable positions above your chest and continue alternating sides for the prescribed number of repetitions.

The rectus abdominis contributes to maintaining trunk stability throughout the exercise. As the knees move away from the center, the abdominal muscles help control pelvic positioning and resist excessive lumbar extension. Their involvement becomes more demanding as the legs move farther from the vertical starting position.

The internal and external obliques are particularly important during the Double Kettlebell Bent-Knee Windshield Wipers. These muscles contribute to controlling trunk and pelvic rotation while resisting unwanted movement. As the knees move toward one side and return to the center, the obliques help manage rotational forces and maintain coordinated movement between the pelvis and torso.

The transverse abdominis and deeper trunk stabilizers also contribute to abdominal tension and spinal control. These muscles work with the rectus abdominis and obliques to maintain a stable trunk while the knees move through a controlled arc. Their role is primarily stabilization rather than producing a visible crunching movement.

The hip flexors contribute to maintaining the elevated thigh position and controlling hip movement. The iliopsoas and rectus femoris help support the legs as they move away from and return toward the center. Because the knees remain bent, the lever length is shorter than in straight-leg windshield wipers, reducing some of the rotational demand on the trunk.

The adductor muscles help maintain the knees together and contribute to controlling lower-body positioning. Their involvement is particularly noticeable when the athlete attempts to prevent the legs from separating during the side-to-side movement. The quadriceps contribute to maintaining the selected knee angle, although their demand is generally lower than in a straight-leg variation.

The shoulders and upper back play an important stabilizing role because two kettlebells are held independently above the chest. The deltoids, rotator cuff muscles, serratus anterior, trapezius, and other supporting muscles help maintain stable arm positions while the lower body rotates. The forearm muscles maintain secure grips and stabilize the wrists.

One of the main benefits of the Double Kettlebell Bent-Knee Windshield Wipers is the development of rotational core control. The athlete must manage the movement of both knees while maintaining stability through the trunk and upper body. This creates a coordination demand that differs from conventional abdominal exercises performed primarily in one plane of motion.

Another benefit is the ability to challenge the abdominal muscles while using a shorter lower-body lever than straight-leg windshield wipers. Keeping the knees bent reduces the mechanical demand created by the legs, allowing the athlete to focus more directly on controlling pelvic rotation and maintaining spinal stability.

The two kettlebells add an independent upper-body stabilization component. Holding one weight in each hand requires both shoulders to maintain stable positions while the lower body moves. This can increase the overall coordination challenge compared with holding a single kettlebell using both hands.

The exercise can also help develop awareness of pelvic positioning and spinal control. The athlete must distinguish between controlled pelvic rotation and excessive movement through the lumbar spine. Learning to maintain a stable upper body while the lower body moves can be useful in broader strength and athletic training contexts.

A common mistake is allowing the knees to fall rapidly from side to side. This uses momentum rather than controlled muscular effort and may create excessive rotational stress through the lower back. The movement should be performed slowly, with the abdominal muscles controlling both the lowering and return phases.

Another common mistake is attempting to touch the floor regardless of mobility or strength limitations. Lowering the knees too far may cause excessive lumbar rotation, uncontrolled pelvic movement, or loss of upper-back contact with the mat. A smaller range of motion is appropriate when necessary to maintain control.

Allowing the kettlebells to sway is another technique error. Both kettlebells should remain approximately stationary above the chest while the knees move. Excessive kettlebell movement may indicate insufficient shoulder stability, poor abdominal control, or an inappropriate kettlebell weight.

Using excessive resistance can also compromise the exercise. Because both kettlebells are held above the body, the athlete must maintain secure grips and stable shoulder positions throughout the set. Lightweight kettlebells are generally sufficient to introduce the additional stabilization challenge.

The Double Kettlebell Bent-Knee Windshield Wipers differ from traditional Bodyweight Bent-Knee Windshield Wipers because the arms are occupied holding kettlebells rather than resting on the floor for support. This changes the upper-body stabilization demands and may make it more difficult to maintain control during the rotational movement.

The exercise also differs from the Single Kettlebell Windshield Wipers because each arm supports its own kettlebell. The single-kettlebell variation allows both hands to stabilize one weight, while the double-kettlebell variation requires independent shoulder and wrist control.

Compared with straight-leg windshield wipers, the bent-knee variation reduces the lower-body lever length and generally decreases the rotational demand created by the legs. This can make the leg movement easier to control, although the two overhead kettlebells increase the upper-body stabilization requirements.

The exercise also differs from Hanging Windshield Wipers. Hanging windshield wipers are performed while suspended from a pull-up bar, requiring substantial grip, shoulder, and trunk strength. The floor-based double-kettlebell variation provides support through the mat while introducing independent overhead kettlebell stabilization.

For beginners, the movement should first be practiced without kettlebells. Bodyweight bent-knee windshield wipers allow the athlete to develop abdominal control and learn the rotational pattern without additional overhead loading. Once the movement can be performed consistently, a single lightweight kettlebell can be introduced before progressing to two kettlebells.

After mastering the single-kettlebell variation, two lightweight kettlebells can be introduced above the chest. The athlete should initially use a smaller knee-lowering range while learning to maintain independent shoulder stability. Progression should occur only when spinal and shoulder control remain consistent.

More experienced athletes can increase the knee-lowering range, add controlled pauses, gradually increase kettlebell resistance, or progress toward a straight-leg variation. However, increasing kettlebell weight should not compromise shoulder stability or create unnecessary risk from holding heavy objects above the body.

The Double Kettlebell Bent-Knee Windshield Wipers can be incorporated into advanced core workouts, full-body strength sessions, and athletic conditioning programs. The exercise is generally best performed for low to moderate repetitions with a slow, controlled tempo. High-repetition sets may lead to fatigue that compromises spinal or shoulder control.

Breathing should remain steady throughout the movement. Exhaling as the knees return toward the center can help maintain abdominal tension, while controlled inhalation during the lowering phase supports a consistent rhythm. Avoid prolonged breath-holding, particularly when holding two kettlebells above the chest.

Overall, the Double Kettlebell Bent-Knee Windshield Wipers are an advanced core exercise that develops abdominal strength, rotational control, pelvic stability, independent shoulder stabilization, and coordinated lower-body movement. When performed with lightweight kettlebells, controlled knee movement, appropriate range of motion, and stable spinal positioning, the exercise provides a challenging addition to a comprehensive strength and conditioning program.

About this guide
Written byTeam Exercise Library
Reviewed byDr. Jaime Alnassim
Updated
01

Setup

42
  • Select two kettlebells of equal weight that you can safely stabilize above your chest while lying on your back.
  • Begin with lightweight kettlebells until you can maintain independent shoulder stability and controlled lower-body rotation.
  • Understand that this variation involves holding one kettlebell in each hand with both arms extended above the chest while moving the bent knees from side to side.
  • Keep the kettlebells stationary throughout the exercise rather than rotating the weights with the legs.
  • Choose a flat, stable, non-slip training surface.
  • Use an exercise mat to provide cushioning for your back and pelvis.
  • Ensure sufficient space on both sides of your body for the knees to move through a controlled arc.
  • Check that there are no nearby objects that could interfere with the movement.
  • Place both kettlebells securely on the floor beside your body.
  • Position the kettlebells so that you can safely grasp them without excessive reaching or twisting.
  • Sit on the mat with your knees bent and feet planted.
  • Bring the kettlebells close to your body before lowering yourself onto your back.
  • Lie on your back with your head, shoulders, torso, and pelvis supported by the mat.
  • Keep your head and neck in a comfortable neutral position.
  • Direct your gaze toward the ceiling.
  • Position one kettlebell in each hand near the sides of your chest.
  • Maintain a secure grip on both kettlebell handles.
  • Keep your wrists approximately neutral.
  • Press both kettlebells upward until your arms are extended above your chest.
  • Position each kettlebell approximately above its corresponding shoulder.
  • Maintain a comfortable distance between the kettlebells.
  • Avoid allowing the kettlebells to collide.
  • Keep your elbows extended with a slight natural bend.
  • Maintain stable shoulder-blade positioning against the mat.
  • Engage your shoulder stabilizers to keep both kettlebells stationary.
  • Avoid excessive shoulder shrugging.
  • Brace your abdominal muscles before lifting your legs.
  • Bend both hips and knees to approximately 90 degrees.
  • Raise your feet off the floor into a tabletop position.
  • Position your thighs approximately perpendicular to the floor.
  • Keep your shins approximately parallel to the floor.
  • Maintain your knees together or separated by a small comfortable distance.
  • Keep your ankles relaxed and your feet aligned.
  • Maintain a comfortable lower-back position.
  • Align your rib cage with your pelvis.
  • Prepare to lower both bent knees toward one side.
  • Allow controlled pelvic rotation while keeping your upper back supported.
  • Choose a movement range that does not require excessive lumbar twisting.
  • Prepare to return your knees to the center using your abdominal muscles.
  • Plan to alternate sides while keeping both kettlebells stable.
  • Choose a repetition range that allows consistent abdominal and shoulder control.
  • Prepare to lower your feet and kettlebells safely after completing the set.
02

Execution steps

61
  1. Begin lying on your back on an exercise mat.
  2. Hold one kettlebell securely in each hand.
  3. Press both kettlebells upward until your arms are extended above your chest.
  4. Position the kettlebells approximately above your shoulders.
  5. Maintain a comfortable distance between the kettlebells.
  6. Keep your wrists approximately neutral.
  7. Maintain a slight natural bend in your elbows.
  8. Keep your shoulder blades supported by the mat.
  9. Relax unnecessary tension in your neck.
  10. Maintain your gaze toward the ceiling.
  11. Brace your abdominal muscles.
  12. Lift both legs into a tabletop position.
  13. Bend your hips and knees approximately 90 degrees.
  14. Keep your thighs approximately perpendicular to the floor.
  15. Maintain your shins approximately parallel to the floor.
  16. Keep your knees together or slightly separated.
  17. Align your rib cage with your pelvis.
  18. Maintain both kettlebells in a stationary position.
  19. Begin slowly lowering both bent knees toward your right side.
  20. Allow your pelvis to rotate naturally as your knees move.
  21. Keep your knees moving together.
  22. Maintain approximately the same knee angle throughout the descent.
  23. Keep your upper back and shoulders supported by the mat.
  24. Avoid allowing either kettlebell to drift toward your head.
  25. Maintain independent shoulder stability in both arms.
  26. Keep your abdominal muscles engaged.
  27. Continue lowering your knees only as far as you can maintain controlled pelvic and spinal positioning.
  28. Avoid forcing your knees to touch the floor.
  29. Stop before your upper back lifts excessively or your lower back twists uncontrollably.
  30. Pause briefly at the end of the controlled range.
  31. Engage your obliques and abdominal muscles to begin returning your knees toward the center.
  32. Raise both knees together in a smooth, controlled arc.
  33. Avoid swinging your legs upward using momentum.
  34. Return your hips and knees to the tabletop starting position.
  35. Reestablish stable abdominal tension.
  36. Begin slowly lowering both bent knees toward your left side.
  37. Allow controlled pelvic rotation in the opposite direction.
  38. Maintain stable contact between your upper back and the mat.
  39. Keep both kettlebells stationary above your chest.
  40. Maintain secure grips and neutral wrist positioning.
  41. Lower your knees only as far as your abdominal strength and mobility allow.
  42. Pause briefly at the end of the movement.
  43. Engage your abdominal muscles to return your knees toward the center.
  44. Keep your knees moving together during the return.
  45. Avoid allowing your feet to swing independently.
  46. Return to the tabletop position under control.
  47. Continue alternating between the right and left sides.
  48. Maintain a slow and deliberate tempo.
  49. Keep your abdominal muscles engaged throughout both the lowering and lifting phases.
  50. Avoid allowing the kettlebells to sway or rotate excessively.
  51. Maintain steady breathing throughout the exercise.
  52. Exhale during the more demanding return toward the center.
  53. Inhale in a controlled manner during the lowering phase.
  54. Avoid forcing a range of motion that compromises spinal or shoulder control.
  55. Complete the prescribed number of repetitions on each side.
  56. After the final repetition, return both knees to the center.
  57. Lower one foot at a time to the floor.
  58. Bend your elbows and carefully lower both kettlebells toward your chest.
  59. Return the kettlebells safely to the floor using a controlled movement.
  60. Release the handles only after both kettlebells are securely supported.
  61. Relax your abdominal muscles and return to a comfortable resting position.
03

Coaching cues

33
  • Keep both kettlebells stacked above your shoulders.
  • Maintain a secure grip on each kettlebell.
  • Keep your arms stable.
  • Brace your abdominal muscles.
  • Keep your ribs aligned with your pelvis.
  • Maintain a tabletop leg position.
  • Keep your knees bent approximately 90 degrees.
  • Move both knees together.
  • Lower your knees slowly to one side.
  • Allow controlled pelvic rotation.
  • Keep your upper back supported.
  • Avoid excessive lumbar twisting.
  • Maintain independent shoulder stability.
  • Do not let the kettlebells sway.
  • Keep the kettlebells separated.
  • Control the lowering phase.
  • Use your obliques to return to center.
  • Avoid swinging your legs.
  • Keep your head relaxed.
  • Maintain a neutral neck position.
  • Keep your gaze toward the ceiling.
  • Lower only as far as you can control.
  • Do not force your knees to the floor.
  • Keep your shoulders approximately level.
  • Maintain steady breathing.
  • Exhale as your knees return to center.
  • Keep your movement smooth and deliberate.
  • Avoid using momentum.
  • Maintain consistent range on both sides.
  • Prioritize spinal control over movement depth.
  • Keep both kettlebells away from your face.
  • Stop if either shoulder becomes unstable.
  • Focus on quality rather than speed.
04

Common mistakes

37
  • Using kettlebells that are too heavy to stabilize safely.
  • Using kettlebells of significantly different weights without a specific training purpose.
  • Positioning the kettlebells directly above the face.
  • Holding either kettlebell with an insecure grip.
  • Allowing the wrists to bend excessively.
  • Allowing the elbows to collapse during the exercise.
  • Letting the kettlebells drift toward the moving knees.
  • Allowing one kettlebell to sway more than the other.
  • Allowing the kettlebells to collide.
  • Failing to stabilize both shoulders independently.
  • Shrugging the shoulders excessively.
  • Lifting the head and neck unnecessarily.
  • Failing to engage the abdominal muscles before moving the knees.
  • Lowering the knees too quickly.
  • Using momentum to swing the legs from side to side.
  • Allowing the knees to separate excessively.
  • Straightening the knees unintentionally during the movement.
  • Allowing the knee angles to change significantly between sides.
  • Forcing the knees toward the floor regardless of mobility limitations.
  • Allowing the upper back to lift excessively from the mat.
  • Rotating the torso uncontrollably.
  • Allowing excessive lumbar extension during the movement.
  • Failing to control pelvic rotation.
  • Allowing the feet to swing independently of the knees.
  • Returning the knees to the center using momentum.
  • Allowing the lower back to arch excessively during the return.
  • Moving through an excessively large range of motion.
  • Holding the breath throughout the exercise.
  • Failing to coordinate breathing with the movement.
  • Performing significantly more repetitions on one side.
  • Using inconsistent movement ranges between sides.
  • Allowing either kettlebell to move toward the head as fatigue develops.
  • Continuing repetitions after shoulder stability deteriorates.
  • Failing to maintain a controlled lowering tempo.
  • Dropping the knees abruptly toward the floor.
  • Lowering the kettlebells unsafely after completing the set.
  • Continuing the exercise despite lower-back or shoulder discomfort.
05

Safety notes

35
  • The double kettlebell bent-knee windshield wiper is an advanced core exercise requiring abdominal strength, rotational control, and independent shoulder stability.
  • Master bodyweight bent-knee windshield wipers before introducing kettlebells.
  • Develop proficiency in holding two kettlebells securely above the chest before combining the hold with leg rotation.
  • Begin with two lightweight kettlebells.
  • Perform the exercise on a flat, stable, non-slip surface.
  • Use an exercise mat for comfort and support.
  • Ensure sufficient space on both sides of your body.
  • Maintain a secure grip on both kettlebells throughout the exercise.
  • Keep each kettlebell approximately above its corresponding shoulder rather than directly above your face.
  • Avoid allowing either kettlebell to drift toward your head.
  • Maintain stable shoulder positioning throughout the set.
  • Keep your wrists approximately neutral.
  • Avoid forcing your elbows into an uncomfortable locked position.
  • Do not continue if either arm begins shaking uncontrollably.
  • Maintain abdominal tension before moving your knees.
  • Control pelvic rotation rather than allowing the legs to fall sideways.
  • Avoid forcing excessive lumbar rotation.
  • Maintain a comfortable spinal position throughout the movement.
  • Keep your upper back and shoulders supported by the mat.
  • Reduce the knee-lowering range if your lower back begins arching excessively.
  • Avoid forcing your knees to touch the floor.
  • Keep your knees bent to reduce the rotational lever length.
  • Keep your head and neck relaxed against the mat.
  • Avoid excessive neck tension.
  • Maintain steady breathing throughout the exercise.
  • Stop if you experience sharp lower-back, hip, neck, shoulder, elbow, or wrist pain.
  • Individuals with existing spinal conditions should seek appropriate professional guidance before performing loaded rotational core exercises.
  • Individuals with shoulder instability or limited overhead control should avoid holding kettlebells above the body until appropriate strength and stability are established.
  • Avoid high-repetition sets when fatigue compromises spinal or shoulder control.
  • Use a slow, controlled tempo rather than swinging the knees.
  • Keep both kettlebells stationary while the legs move.
  • Do not allow the kettlebells to collide or contact your face.
  • Lower your feet to the floor before bringing the kettlebells back toward your chest.
  • Return both kettlebells safely to the floor before releasing your grip.
  • Stop immediately if you lose control of either kettlebell.

This article is for general education, not medical advice. If you have pain or an injury, check with a doctor or physical therapist before starting a new exercise.

Also known as
Two-Kettlebell Bent-Knee Windshield WipersDouble Kettlebell Bent-Leg Windshield WipersDual Kettlebell Windshield WipersDouble Kettlebell Supine Windshield WipersDouble Kettlebell Bent-Knee Leg RotationsDouble Kettlebell Floor Windshield WipersDual Kettlebell Core Rotations

This website uses cookies to enhance your browsing experience and ensure the site functions properly. By continuing to use this site, you acknowledge and accept our use of cookies.

Accept All Accept Required Only