Opens in a new tab

Double Kettlebell Shoulder Press

  • MuscleShoulders
  • EquipmentKettlebell
  • LevelIntermediate

Muscles worked

Double Kettlebell Shoulder Press
ChestObliquesAbsBicepsTricepsNeckFront deltsAdductorsQuadsCalvesForearms
Front
TrapsRear deltsUpper backTricepsLower backForearmsGlutesHip abductorsHamstringsCalvesCalvesCalves
Back
PrimarySecondary
Exercise guide

How to do the Double Kettlebell Shoulder Press

The Double Kettlebell Shoulder Press is a compound upper-body strength exercise that primarily targets the deltoid muscles of the shoulders while also engaging the triceps, upper back, trapezius, forearms, and abdominal muscles. The exercise involves pressing two kettlebells simultaneously from a front rack position to an overhead position using controlled shoulder and elbow extension. Unlike single-arm kettlebell presses, this variation requires both arms to work together while the torso stabilizes the combined resistance of two independently moving weights.

The Double Kettlebell Shoulder Press is typically performed standing, with one kettlebell held in each hand. The kettlebells begin in the front rack position, resting against the forearms and upper arms near shoulder height. From this position, both weights are pressed overhead without assistance from the legs. This strict pressing technique emphasizes upper-body muscular strength rather than the explosive leg drive used during a kettlebell push press or push jerk.

To perform the exercise, begin by selecting two kettlebells of equal weight. Stand with your feet approximately hip-width to shoulder-width apart and position the kettlebells in front of your feet. Using a controlled clean, bring both kettlebells into the front rack position. Keep your wrists relatively straight, your elbows slightly forward, and the rounded bodies of the kettlebells resting comfortably against your forearms.

Establish a stable standing position before pressing. Brace your abdominal muscles, engage your glutes, and maintain a neutral pelvis. Keep your rib cage stacked above your hips rather than allowing your lower back to arch excessively. Your knees should remain extended throughout the movement, as this variation does not involve leg drive.

Initiate the press by driving both kettlebells upward using your shoulders and triceps. As your elbows extend, allow your upper arms to move through a comfortable pressing path. The kettlebells may travel slightly outward as they rise, depending on your shoulder structure and rack position. Avoid forcing the weights into an unnatural path or pressing them excessively far forward.

As the kettlebells pass your head, allow your shoulder blades to rotate upward naturally. You may move your head slightly backward to create clearance before returning it to a neutral position. Continue pressing until your elbows are extended and both kettlebells are balanced securely overhead. Your upper arms should finish near your ears, provided your shoulder mobility allows this position comfortably.

At the top of the movement, maintain abdominal tension and avoid leaning backward. The kettlebells should be positioned over a stable base of support rather than held excessively forward. Pause briefly to establish control before beginning the lowering phase. Bend your elbows and lower both kettlebells gradually back to the front rack position, keeping the movement smooth and controlled.

The deltoid muscles are the primary movers during the Double Kettlebell Shoulder Press. The anterior deltoids contribute significantly to raising the arms, while the lateral deltoids assist with shoulder elevation and stabilization. The triceps brachii extend the elbows as the kettlebells travel overhead and contribute to achieving a stable lockout position.

The trapezius and serratus anterior support upward rotation and stabilization of the shoulder blades during the overhead movement. This coordinated scapular motion is important for achieving a comfortable pressing position. The rotator cuff muscles also contribute by stabilizing the shoulder joints as the kettlebells move through the pressing range.

The abdominal muscles and spinal stabilizers help maintain an upright torso against the combined resistance of the kettlebells. Because both arms are loaded, the exercise requires consistent trunk stiffness to prevent excessive spinal extension. The forearm muscles maintain grip strength and wrist stability, particularly as the kettlebells transition from the rack position to overhead.

One advantage of the double kettlebell variation is that each arm must control its own weight independently. Unlike a barbell, which connects both hands through a single implement, kettlebells allow each shoulder and arm to move through a slightly individualized pressing path. This can help accommodate differences in shoulder mobility and pressing mechanics while requiring additional coordination and stabilization.

The Double Kettlebell Shoulder Press also allows substantial upper-body loading without requiring a barbell or specialized equipment. It can be incorporated into strength training programs focused on shoulder development, overhead pressing ability, and upper-body muscular endurance. The standing position adds a trunk stabilization requirement that is less pronounced during supported seated shoulder presses.

A common mistake is leaning backward to complete difficult repetitions. This often occurs when the kettlebells are too heavy or the lifter lacks sufficient overhead mobility. Excessive backward leaning increases spinal extension and changes the intended pressing mechanics. Maintain abdominal tension and reduce the weight if you cannot press overhead while keeping your rib cage and pelvis aligned.

Another common mistake is using knee drive to assist the movement. Although this technique is appropriate during a kettlebell push press, it changes the exercise from a strict shoulder press into a leg-assisted movement. For the Double Kettlebell Shoulder Press, keep your lower body stable and generate the upward force primarily through your shoulders and triceps.

Poor wrist positioning can also interfere with the movement. Allowing the wrists to bend excessively backward may create discomfort and reduce control over the kettlebells. Maintain a secure grip and keep the wrists relatively straight, with the kettlebell handles positioned comfortably across the palms.

The Double Kettlebell Shoulder Press differs from the Single-Arm Kettlebell Shoulder Press because both arms press simultaneously, creating a more symmetrical loading pattern and increasing the total external resistance. The single-arm variation places greater emphasis on resisting lateral trunk movement because the load is concentrated on one side.

It also differs from the Double Kettlebell Push Press, which uses a rapid knee and hip extension to help accelerate the kettlebells overhead. The strict shoulder press eliminates this leg assistance, making the shoulders and triceps responsible for producing the majority of the lifting force. Compared with the Barbell Military Press, the kettlebell variation permits independent arm movement and requires each wrist and shoulder to stabilize a separate weight.

Overall, the Double Kettlebell Shoulder Press is an effective exercise for developing shoulder strength, triceps strength, overhead stability, and upper-body coordination. When performed with appropriate resistance, a secure front rack position, stable trunk alignment, and controlled overhead movement, it provides a practical way to strengthen the shoulders while improving the ability to manage two independent loads.

About this guide
Written byTeam Exercise Library
Reviewed byDr. Jaime Alnassim
Updated
01

Setup

18
  • Select two kettlebells of equal weight that allow you to perform controlled overhead presses without using momentum from your legs.
  • Place both kettlebells on the floor slightly in front of your feet with their handles positioned for a comfortable grip.
  • Stand with your feet approximately hip-width to shoulder-width apart and your toes pointing forward or slightly outward.
  • Bend at your hips and knees while maintaining a neutral spine to reach the kettlebell handles.
  • Grip both kettlebells securely with your wrists aligned behind the handles.
  • Clean the kettlebells into the front rack position using a controlled hip-driven movement, or begin with the kettlebells already safely positioned at shoulder height.
  • Position each kettlebell against the outside of its corresponding forearm, with the rounded body of the bell resting comfortably against the forearm and upper arm.
  • Keep your wrists relatively straight rather than allowing them to bend excessively backward.
  • Position your elbows slightly forward of your torso, with your forearms approximately vertical.
  • Allow your upper arms to rest near your rib cage in a comfortable front rack position.
  • Keep your shoulders relaxed and avoid excessive shrugging before beginning the press.
  • Brace your abdominal muscles and maintain a neutral pelvis.
  • Engage your glutes lightly to create a stable standing position.
  • Keep your knees extended but not forcefully locked.
  • Maintain balanced pressure through your entire feet.
  • Position your head neutrally with your eyes looking forward.
  • Ensure there is adequate overhead clearance and sufficient space around your body.
  • Establish a stable double kettlebell front rack position before initiating the first repetition.
02

Execution steps

26
  1. Begin standing upright with one kettlebell in each hand, positioned securely in the front rack at shoulder height.
  2. Place your feet approximately hip-width to shoulder-width apart and maintain balanced pressure through the floor.
  3. Brace your abdominal muscles and engage your glutes to stabilize your torso and pelvis.
  4. Keep your wrists relatively straight and your elbows positioned slightly forward of your body.
  5. Inhale and prepare to press while maintaining a neutral spinal position.
  6. Initiate the movement by driving both kettlebells upward using your shoulder and triceps muscles.
  7. Extend your elbows as the kettlebells travel upward from the front rack position.
  8. Allow your elbows to move outward naturally as your upper arms elevate.
  9. Keep the kettlebells traveling through a comfortable overhead path rather than forcing them directly in front of your face.
  10. Move your head slightly backward if necessary to allow the kettlebells to pass safely.
  11. Avoid bending your knees or using leg drive to assist the upward movement.
  12. Continue pressing both kettlebells overhead while maintaining abdominal tension.
  13. Allow your shoulder blades to rotate upward naturally as your arms approach the overhead position.
  14. Bring your upper arms into a comfortable overhead alignment, generally near your ears.
  15. Finish with both elbows extended and the kettlebells balanced securely above your shoulders.
  16. Maintain a stable rib cage and avoid excessive arching through your lower back.
  17. Keep your wrists aligned and the kettlebells resting securely against your forearms.
  18. Pause briefly at the top while maintaining control of both kettlebells.
  19. Begin the lowering phase by bending your elbows and bringing the kettlebells downward in a controlled manner.
  20. Allow your shoulder blades to rotate naturally as your upper arms lower.
  21. Keep your torso upright and avoid leaning backward as the kettlebells descend.
  22. Return both kettlebells to the front rack position at shoulder height.
  23. Maintain abdominal tension and avoid allowing the kettlebells to crash into your forearms or upper arms.
  24. Reset your breathing and body position before beginning the next repetition.
  25. Repeat the movement for the desired number of controlled repetitions.
  26. After completing the set, lower the kettlebells from the rack position and return them safely to the floor using a controlled hip and knee bend.
03

Coaching cues

20
  • Start with both kettlebells securely in the front rack.
  • Keep your wrists straight and stacked.
  • Brace your core before pressing.
  • Keep your ribs stacked over your pelvis.
  • Squeeze your glutes to stabilize your lower body.
  • Press both kettlebells upward together.
  • Drive through your shoulders and triceps.
  • Keep your legs still throughout the press.
  • Avoid using knee drive or bouncing.
  • Allow your elbows to follow a natural pressing path.
  • Let your shoulder blades rotate upward.
  • Move your head slightly to clear the kettlebells.
  • Finish with your arms extended overhead.
  • Keep the kettlebells balanced above your shoulders.
  • Avoid leaning backward to complete the press.
  • Maintain a neutral neck position.
  • Lower both kettlebells slowly.
  • Control the return to the front rack.
  • Keep your feet firmly planted.
  • Maintain consistent technique throughout the set.
04

Common mistakes

22
  • Selecting kettlebells that are too heavy to press with strict technique.
  • Using the legs to drive the kettlebells upward instead of relying on shoulder and triceps strength.
  • Leaning excessively backward during the pressing phase.
  • Arching the lower back to compensate for limited overhead mobility.
  • Allowing the rib cage to flare excessively.
  • Failing to brace the abdominal muscles before pressing.
  • Starting with the elbows positioned too far behind the torso.
  • Allowing the wrists to bend excessively backward.
  • Holding the kettlebells too loosely and losing wrist alignment.
  • Pressing the kettlebells too far forward instead of achieving a stable overhead position.
  • Forcing the kettlebells into an uncomfortable overhead path.
  • Failing to allow natural upward rotation of the shoulder blades.
  • Shrugging excessively before initiating the movement.
  • Pressing one kettlebell significantly faster than the other.
  • Allowing one arm to drift outward or forward during the press.
  • Failing to extend the elbows at the top when a full overhead position is available.
  • Overextending the lower back at lockout.
  • Lowering the kettlebells too quickly.
  • Allowing the kettlebells to crash into the forearms during the descent.
  • Holding the breath throughout multiple repetitions.
  • Using momentum to complete the final repetitions.
  • Continuing the set after shoulder or trunk control deteriorates.
05

Safety notes

20
  • Begin with lighter kettlebells until you can maintain proper overhead pressing mechanics.
  • Use two kettlebells of equal weight unless intentionally performing an uneven-loading variation.
  • Ensure you have sufficient shoulder mobility to reach a comfortable overhead position without excessive spinal extension.
  • Maintain abdominal tension throughout the exercise to support spinal stability.
  • Avoid leaning backward or excessively arching the lower back during the press.
  • Keep your wrists relatively straight to reduce unnecessary wrist strain.
  • Maintain a secure grip on both kettlebells throughout the movement.
  • Avoid using sudden knee drive or momentum when performing the strict press variation.
  • Allow your shoulder blades to rotate naturally as your arms move overhead.
  • Do not force your elbows or shoulders into painful positions.
  • Keep your feet firmly planted and maintain a stable stance.
  • Avoid pressing overhead in areas with insufficient ceiling clearance.
  • Maintain control of both kettlebells throughout the lifting and lowering phases.
  • Do not allow the kettlebells to fall rapidly into the front rack position.
  • Reduce the resistance if one arm consistently loses alignment or control.
  • Avoid attempting repetitions beyond your ability to maintain stable overhead positioning.
  • Individuals with existing shoulder, wrist, or spinal conditions should seek appropriate professional guidance before performing heavy overhead presses.
  • Stop if you experience sharp pain, numbness, dizziness, or unusual joint discomfort.
  • Do not attempt to catch a falling kettlebell; move clear of the weight if control is lost.
  • Return both kettlebells to the floor using controlled movement rather than dropping them unexpectedly.

This article is for general education, not medical advice. If you have pain or an injury, check with a doctor or physical therapist before starting a new exercise.

Also known as
Double Kettlebell Overhead PressDouble Kettlebell Strict PressStanding Double Kettlebell PressTwo-Kettlebell Shoulder PressDouble Kettlebell Military PressBilateral Kettlebell Overhead Press

This website uses cookies to enhance your browsing experience and ensure the site functions properly. By continuing to use this site, you acknowledge and accept our use of cookies.

Accept All Accept Required Only