Opens in a new tab

Double Kettlebell Bottoms-Up Press

  • MuscleShoulders
  • EquipmentKettlebell
  • LevelAdvanced

Muscles worked

Double Kettlebell Bottoms-Up Press
ChestObliquesAbsBicepsTricepsNeckFront deltsAdductorsQuadsCalvesForearms
Front
TrapsRear deltsUpper backTricepsLower backForearmsGlutesHip abductorsHamstringsCalvesCalvesCalves
Back
PrimarySecondary
Exercise guide

How to do the Double Kettlebell Bottoms-Up Press

The Double Kettlebell Bottoms-Up Press is an advanced upper-body strength exercise that primarily targets the shoulders while challenging grip strength, wrist stability, and overhead control. The movement involves pressing two kettlebells simultaneously while holding them upside down, with the weighted bells positioned above the handles. This inverted loading position requires continuous muscular coordination to prevent the kettlebells from tipping during the pressing movement.

Unlike a traditional double kettlebell shoulder press, where the kettlebells rest against the forearms, the bottoms-up variation requires both weights to remain balanced above the hands. This increases the demand on the forearms, wrists, shoulders, and stabilizing muscles. The exercise also requires coordinated movement between both arms while the core maintains a stable torso.

To perform the Double Kettlebell Bottoms-Up Press, begin standing with your feet approximately shoulder-width apart. Hold one lightweight kettlebell in each hand and carefully position both weights upside down near your shoulders. Keep your elbows bent, wrists straight, and forearms approximately vertical beneath the kettlebells. Establish a secure grip before attempting the overhead press.

Maintain a tall posture with your chest lifted and abdominal muscles engaged. Keep your ribs aligned over your pelvis and avoid excessive lower-back extension. Both kettlebells should remain relatively steady in the starting rack position. If either weight begins tipping uncontrollably, regain control before initiating the movement.

Begin the press by extending both elbows and raising your upper arms simultaneously. Move the kettlebells upward in a smooth, controlled motion while keeping the weighted bells pointing toward the ceiling. Maintain firm grip pressure and prevent the handles from rotating excessively in your hands.

As your arms move overhead, allow your shoulder blades to rotate naturally. Continue pressing until both elbows reach a comfortable extended position and the kettlebells are balanced above your shoulders. Avoid leaning backward, flaring your ribs, or using momentum from your legs to complete the movement.

At the top of the press, briefly stabilize both kettlebells while maintaining an upright torso. Your wrists should remain aligned with your forearms, and the kettlebells should stay balanced above the handles. Slowly bend your elbows to lower the weights toward your shoulders, controlling their position throughout the descent.

The shoulders are the primary muscles responsible for the pressing action. The anterior and lateral deltoids contribute to raising the arms, while surrounding shoulder muscles help maintain joint stability. Because both kettlebells are inverted, the shoulders must coordinate force production with continuous adjustments that keep the weights balanced.

The triceps assist by extending the elbows during the upward phase. They also contribute to controlling elbow flexion during the lowering phase. The traps and upper-back muscles support shoulder blade positioning and upward rotation, allowing the arms to move overhead with appropriate coordination.

The forearms play an especially important role in the Double Kettlebell Bottoms-Up Press. Maintaining two inverted kettlebells requires continuous grip pressure and wrist stabilization. Small changes in wrist position can cause the weights to tilt, making the exercise more demanding than a conventional overhead press using the same kettlebell weight.

The core muscles help stabilize the spine and pelvis throughout the movement. Because both arms are loaded overhead, the torso must resist excessive backward leaning and lower-back extension. Maintaining abdominal tension helps keep the body aligned and allows the shoulders to perform the pressing movement without unnecessary compensation.

One common mistake is using kettlebells that are too heavy. The bottoms-up position creates substantial balance demands, and the ability to press a heavier kettlebell conventionally does not guarantee control when the weight is inverted. Choose resistance that allows both kettlebells to remain stable during the entire movement.

Another common mistake is allowing the wrists to bend backward. Excessive wrist extension can reduce stability and make the kettlebells more difficult to control. Maintain a straight wrist position and squeeze the handles firmly while keeping your forearms aligned beneath the weights.

Uneven pressing is another issue. One arm may move faster or reach the overhead position before the other, creating differences in balance and control. Focus on raising both kettlebells at a consistent speed while allowing each shoulder to move through a comfortable range of motion.

Excessive backward leaning should also be avoided. When overhead mobility or shoulder strength is insufficient, the body may compensate by arching the lower back. Maintain a stable torso, control your rib position, and avoid forcing the kettlebells beyond a comfortable overhead position.

The Double Kettlebell Bottoms-Up Press differs from the Single-Arm Bottoms-Up Kettlebell Press because both arms work simultaneously. The single-arm variation introduces an uneven load that challenges resistance to sideways leaning, while the double variation increases the total stabilization demand and requires coordinated control of two independently balanced weights.

Overall, the Double Kettlebell Bottoms-Up Press is an effective exercise for developing shoulder strength, grip endurance, wrist stability, and overhead coordination. When performed with appropriate resistance, secure grip pressure, controlled pressing mechanics, and stable torso positioning, it provides a challenging variation of the traditional double kettlebell shoulder press.

About this guide
Written byTeam Exercise Library
Reviewed byDr. Jaime Alnassim
Updated
01

Setup

7
  • Stand tall with your feet approximately shoulder-width apart.
  • Hold one lightweight kettlebell in each hand with both weighted bells pointing upward.
  • Position the kettlebells near your shoulders with your elbows bent.
  • Keep your wrists straight and your forearms approximately vertical.
  • Squeeze both kettlebell handles firmly to maintain the inverted positions.
  • Brace your core and keep your ribs aligned over your pelvis.
  • Maintain an upright torso and establish a stable standing position.
02

Execution steps

11
  1. Begin with both kettlebells balanced upside down near your shoulders.
  2. Maintain a firm grip on both handles and keep your wrists straight.
  3. Brace your core and stabilize your torso.
  4. Press both kettlebells upward simultaneously by extending your elbows and raising your upper arms.
  5. Keep the weighted bells pointing upward throughout the pressing movement.
  6. Allow your shoulder blades to rotate naturally as your arms move overhead.
  7. Continue pressing until both elbows reach a comfortable extended position.
  8. Pause briefly overhead while maintaining control of both kettlebells.
  9. Slowly bend your elbows to lower the kettlebells toward your shoulders.
  10. Return to the starting rack position without allowing the kettlebells to tip or rotate.
  11. Repeat while maintaining consistent balance, grip pressure, and pressing technique.
03

Coaching cues

10
  • Keep both bells pointing upward.
  • Squeeze the handles firmly.
  • Maintain straight wrists.
  • Keep your forearms beneath the kettlebells.
  • Brace your core before pressing.
  • Press both arms smoothly.
  • Keep your ribs down.
  • Avoid leaning backward.
  • Maintain even control between both arms.
  • Lower the kettlebells slowly.
04

Common mistakes

12
  • Using kettlebells that are too heavy to balance safely.
  • Allowing one or both kettlebells to tip during the press.
  • Bending the wrists excessively under the load.
  • Pressing unevenly between the left and right arms.
  • Leaning backward to move the kettlebells overhead.
  • Flaring the ribs and excessively arching the lower back.
  • Using leg drive instead of controlled shoulder strength.
  • Pressing too quickly and losing control of the inverted kettlebells.
  • Allowing the elbows to flare excessively during the movement.
  • Shrugging or tensing the neck unnecessarily.
  • Lowering the kettlebells too quickly.
  • Attempting to catch a falling kettlebell.
05

Safety notes

10
  • Use lightweight kettlebells until you can maintain both inverted positions consistently.
  • Develop control with a single-arm bottoms-up press before attempting the double variation.
  • Maintain a secure grip and neutral wrist position throughout the exercise.
  • Practice balancing both kettlebells at shoulder height before pressing overhead.
  • Ensure sufficient overhead and surrounding clearance.
  • Keep your head and face clear of the kettlebells during the movement.
  • Avoid excessive backward leaning or lower-back extension.
  • Do not attempt to catch a kettlebell that begins falling out of control.
  • Move away from falling kettlebells and allow them to reach the floor safely.
  • Stop if you experience sharp pain in the shoulders, elbows, wrists, or lower back.

This article is for general education, not medical advice. If you have pain or an injury, check with a doctor or physical therapist before starting a new exercise.

Also known as
Double Bottoms-Up Kettlebell PressTwo-Arm Bottoms-Up Kettlebell PressDouble Kettlebell Inverted PressBilateral Bottoms-Up Kettlebell Shoulder Press

This website uses cookies to enhance your browsing experience and ensure the site functions properly. By continuing to use this site, you acknowledge and accept our use of cookies.

Accept All Accept Required Only