Opens in a new tab

Double Kettlebell Overhead Carry

  • MuscleShoulders
  • EquipmentKettlebell
  • LevelAdvanced

Muscles worked

Double Kettlebell Overhead Carry
ChestObliquesAbsBicepsTricepsNeckFront deltsAdductorsQuadsCalvesForearms
Front
TrapsRear deltsUpper backTricepsLower backForearmsGlutesHip abductorsHamstringsCalvesCalvesCalves
Back
PrimarySecondary
Exercise guide

How to do the Double Kettlebell Overhead Carry

The Double Kettlebell Overhead Carry is an advanced strength and stability exercise performed while walking with two kettlebells held overhead, one in each hand. The movement primarily targets the shoulders while engaging the traps, upper back, triceps, forearms, abdominal muscles, obliques, and lower-body stabilizers. By combining overhead resistance with controlled walking, the exercise develops shoulder stability, core strength, grip endurance, balance, and full-body coordination.

Unlike a traditional kettlebell farmer’s carry, where the weights hang beside the body, the Double Kettlebell Overhead Carry requires both kettlebells to remain above the shoulders. This position creates additional demands on the shoulder stabilizers and trunk muscles. Maintaining the weights overhead while walking requires continuous adjustments to preserve balance and control as the body moves forward.

To perform the Double Kettlebell Overhead Carry, begin by selecting two kettlebells of equal weight. Choose a resistance that allows you to maintain a secure overhead position without excessive shoulder movement or lower-back arching. Ensure the walking area is flat, clear of obstacles, and provides enough overhead clearance for both kettlebells.

Stand with your feet approximately hip-width apart and position the kettlebells in front of you. Grip one kettlebell in each hand and bring both weights into the front rack position. From this position, press the kettlebells overhead until your arms reach a comfortable extended position. Keep your wrists aligned with your forearms and maintain stable shoulder positioning.

Before walking, engage your abdominal muscles and maintain an upright torso. Keep your ribs aligned over your pelvis and avoid leaning backward to support the weights. Your head should remain neutral, with your eyes looking forward. Establish a stable overhead position before beginning the movement.

Take a small, controlled step forward while keeping both kettlebells balanced overhead. Continue walking with a natural stride, maintaining consistent spacing between your feet. Avoid taking excessively long steps or moving too quickly, as these actions can increase instability and make the overhead position more difficult to maintain.

Throughout the carry, keep your arms extended and your shoulders engaged. The kettlebells should remain generally stacked above your shoulders rather than drifting excessively forward or backward. Allow your shoulder blades to rotate naturally upward to support the overhead position. Avoid forcing your shoulders downward or excessively shrugging to compensate for instability.

Maintain abdominal tension as you walk. Your core muscles help stabilize the spine and resist unnecessary movement caused by the overhead weights. Keep your torso upright and avoid excessive side-to-side leaning, forward bending, or backward arching. Controlled breathing helps maintain stability without requiring you to hold your breath throughout the entire movement.

Continue walking while maintaining consistent overhead alignment and controlled foot placement. Your hips, knees, and ankles should move naturally with each step. Keep your shoulders relatively level and avoid allowing one kettlebell to drift significantly away from its stable position.

When you reach the intended distance, stop walking and establish a balanced standing position. Carefully lower both kettlebells into the front rack position before returning them to the floor. Avoid dropping the weights from overhead or lowering them without control.

The shoulders are the primary muscle group involved in the Double Kettlebell Overhead Carry. The deltoids and surrounding shoulder stabilizers work continuously to maintain the arms overhead. Unlike dynamic pressing exercises, the overhead carry requires prolonged muscular tension to resist unwanted movement while the body travels forward.

The traps and upper-back muscles contribute to shoulder blade positioning and overhead stability. These muscles help maintain an efficient relationship between the shoulder blades and upper arms. The triceps assist by maintaining elbow extension, while the forearms support grip strength and wrist alignment throughout the carry.

The abdominal muscles and obliques play an important role in maintaining trunk stability. Because the kettlebells are positioned above the body, small changes in balance can create additional demands on the core. The abdominal muscles help resist excessive spinal extension, while the obliques contribute to controlling unwanted rotation and lateral movement.

The glutes, quadriceps, and calves also contribute during the walking phase. These muscles support controlled steps, pelvic stability, and balanced movement. Although the exercise primarily challenges the upper body and core, the lower body remains active throughout the carry.

One common mistake is allowing the kettlebells to drift forward as fatigue increases. This changes the position of the load and can make the shoulders work harder to maintain balance. Focus on keeping the kettlebells aligned above your shoulders and stop the carry when you can no longer maintain proper positioning.

Another common mistake is excessive lower-back arching. This often occurs when the kettlebells are too heavy or overhead mobility is limited. Maintain abdominal tension, keep your ribs controlled, and avoid leaning backward to compensate for limited shoulder movement.

Walking too quickly can also reduce stability. The objective is to maintain a controlled overhead position while moving, rather than covering distance as quickly as possible. Short, deliberate steps allow the shoulders and core to respond effectively to changes in balance.

The Double Kettlebell Overhead Carry differs from the Single-Arm Kettlebell Overhead Carry because both arms support separate kettlebells. This creates a more symmetrical loading pattern while increasing the total overhead resistance. It also differs from the Double Kettlebell Front Rack Carry because the weights remain overhead instead of resting near the shoulders.

Overall, the Double Kettlebell Overhead Carry is an effective exercise for developing shoulder strength, overhead stability, core control, grip endurance, and full-body coordination. When performed with appropriate resistance, controlled walking mechanics, stable shoulder positioning, and consistent posture, it provides a challenging way to strengthen the muscles responsible for maintaining and controlling overhead loads.

About this guide
Written byTeam Exercise Library
Reviewed byDr. Jaime Alnassim
Updated
01

Setup

10
  • Select two kettlebells of equal weight that can be safely stabilized overhead.
  • Ensure the walking area is flat, clear of obstacles, and provides sufficient overhead clearance.
  • Stand with your feet approximately hip-width apart and position the kettlebells in front of you.
  • Grip one kettlebell in each hand with your wrists aligned and your hands securely around the handles.
  • Clean both kettlebells into the front rack position.
  • Press both kettlebells overhead until your arms are comfortably extended.
  • Position the kettlebells above your shoulders with your elbows extended and shoulders stable.
  • Keep your ribs aligned over your pelvis and engage your abdominal muscles.
  • Maintain an upright posture with your head in a neutral position.
  • Establish balance and overhead control before beginning to walk.
02

Execution steps

15
  1. Begin standing tall with one kettlebell held overhead in each hand.
  2. Keep both arms extended and maintain stable shoulder positioning.
  3. Brace your core and keep your ribs aligned over your pelvis.
  4. Maintain balanced pressure through both feet.
  5. Take a small, controlled step forward while keeping the kettlebells stable overhead.
  6. Continue walking with a natural, controlled stride.
  7. Keep your torso upright and avoid excessive forward, backward, or sideways leaning.
  8. Maintain relatively straight wrists and secure grips on both kettlebells.
  9. Keep your shoulders engaged and avoid allowing your elbows to bend.
  10. Allow your hips, knees, and ankles to move naturally during each step.
  11. Maintain steady breathing while keeping your abdominal muscles engaged.
  12. Continue walking for the intended distance while maintaining consistent overhead stability.
  13. Stop walking before your grip, posture, or shoulder position begins to deteriorate.
  14. Carefully lower both kettlebells into the front rack position.
  15. Return the kettlebells to the floor under control.
03

Coaching cues

14
  • Keep both kettlebells stacked above your shoulders.
  • Maintain strong, stable overhead arms.
  • Keep your wrists aligned with your forearms.
  • Brace your core throughout the carry.
  • Keep your ribs down.
  • Maintain a tall, upright posture.
  • Avoid excessive lower-back arching.
  • Take short, controlled steps.
  • Keep your shoulders stable.
  • Avoid excessive side-to-side movement.
  • Maintain balanced pressure through your feet.
  • Keep your head and neck neutral.
  • Breathe steadily throughout the movement.
  • Lower the kettlebells before losing overhead control.
04

Common mistakes

14
  • Using kettlebells that are too heavy to stabilize overhead.
  • Allowing the kettlebells to drift excessively forward or backward.
  • Bending the elbows as fatigue increases.
  • Arching the lower back to compensate for limited shoulder mobility.
  • Flaring the ribs during the carry.
  • Allowing the wrists to bend excessively backward.
  • Taking excessively long or uncontrolled steps.
  • Walking too quickly and losing overhead stability.
  • Leaning excessively forward or backward.
  • Allowing the shoulders to lose their stable overhead position.
  • Holding the breath throughout the entire carry.
  • Looking upward instead of maintaining a neutral head position.
  • Continuing the carry after technique begins to deteriorate.
  • Lowering the kettlebells without maintaining control.
05

Safety notes

13
  • Develop proper kettlebell overhead pressing technique before attempting the double overhead carry.
  • Begin with light kettlebells and establish a stable overhead position before walking.
  • Ensure the walking path is clear and provides sufficient overhead clearance.
  • Maintain a secure grip on both kettlebells throughout the exercise.
  • Keep your wrists aligned and avoid excessive backward bending.
  • Maintain comfortable shoulder positioning without forcing your arms into an uncomfortable range of motion.
  • Engage your core to minimize excessive spinal extension.
  • Walk at a controlled pace and avoid sudden changes in direction.
  • Avoid carrying the kettlebells near other people or obstacles.
  • Stop before shoulder fatigue or grip weakness compromises overhead stability.
  • Do not attempt to catch a kettlebell that falls out of control.
  • Carefully lower both kettlebells to the rack position before returning them to the floor.
  • Stop if you experience sharp pain in your shoulders, wrists, elbows, neck, or lower back.

This article is for general education, not medical advice. If you have pain or an injury, check with a doctor or physical therapist before starting a new exercise.

Also known as
Dual Kettlebell Overhead CarryTwo-Kettlebell Overhead CarryDouble Kettlebell Overhead WalkKettlebell Overhead Farmer's Walk

This website uses cookies to enhance your browsing experience and ensure the site functions properly. By continuing to use this site, you acknowledge and accept our use of cookies.

Accept All Accept Required Only